• Subminiature Electric Actuator

    The subminiature actuator is designed for small butterfly valve(<DN40) and ball valve(<DN32), the size is small than a beverage can, the weight is only 1.2KG, can be installed at any position with any angle. Torque: 9-18Nm Operation time 7-60s Voltage: DC24±10% Max nunber of...
    Read More
  • Fast Electric Actuator

    ACLK sereis fast open type actuator is designed for fast operation requirement of butterfly valve and ball valve, can support DC24v, AC24V, AC110V, AC220 and AC380V, for other voltage, welcome contact us. Torque: 15-1200Nm Operation time: 2-12s Adjustable angle: 0-270 degree...
    Read More
  • Mechanical Electric Actuator

    AVAZ type mechanical multi turn actuator used for gate valve and globe valve, torque range from 100Nm to 5000Nm. it has auto phase correction, phase alarm, non intrusive design and over heat protection, can be installed at any position with any angle. Voltage: 110V, 220V,...
    Read More
  • Standard Linear Electro Hydraulic Actuator

    Separate Mounting Linear Electro-Hydraulic Actuator YK series is installed on the automation of control valves, such as Globe valves. It is more simple than hydrualic actuator, can realize all function of hydraulic actuator. ·Output torque 6KN~600KN ·Fast response speed(5Hz),...
    Read More
  • Separated Mount Linear Electro Hydraulic Actuator

    Separate Mounting Linear Electro-Hydraulic Actuator YK series is designed to install on some special location, users can control valve open/close from long distance away,it can also used for space limited application. The actuator feature is as same as standard electro...
    Read More
  • Separated Mount Quarter Turn Electro Hydraulic Actuator

    Separated mount Quarter turn Electro hydraulic actuator is designed for location not easy to access or install, like high vibration or corrosive enviroment, separated actuator has no function difference with standard actuator, the protection of cover also can meet ATEX or...
    Read More
  • Standard Gas Over Oil Actuator

    Our Gas-over-oil Actuator is designed on the basic of our experience on Electric actuator and Electro hydraulic actuator, referring to international advanced actuator technology. It is mainly used in river crossing valve room, Station By-pass valve, Station Entrance/Exit...
    Read More
  • Line Break Protection Gas Over Oil Actuator

    The line break protection gas over oil actuator is designed on the basic of standard actuator, can close the pipe when any pipe leakage detected. Actuator has 3 group pressure sensor, provide higher reliability on detecting pipe pressure change and protection. Our actuator...
    Read More
  • Two Piston Pneumatic Actuator

    1. Pinion and rack structure(2 pistons) 2. Size: PAS032 to PAS400(inside diameter) 3. Working pressure: 3 to 8 bar 4. Switch angles: 0 to 90° ; , ± 5 ° Adjustable 5. Acting: Double acting; Spring return(single acting) 6. Double coatings: Anodize hardening coating(more than...
    Read More
  • 4X4 Pneumatic Actuator

    Greatork Compact Pneumatic Actuator 4x4 utilizes carbon steel pistons that allow for higher cycles because of their greater strength. *Viton seals in the piston drive shaft also lead to higher cycles. Inside surface finish (Ra 0.4 - 0.6um) to minimize friction and to maximize...
    Read More
  • Scotch Yoke Pneumatic Actuator

    PAA series scotch yoke actuator was designed with balance, high strength, high efficient stroke, multi-function modules fetures, compact appearance, widely applied in oil and marine fields. It incorporate over three stages of internal and external coatings to resist severe...
    Read More
  • 180° Fail Safe Pneumatic Actuator

    The 180° spring return actuator with 90° fail safety position is used for 0°-90°-180° operations where in case of air failure the actuator has to return to the 90° position. At both ends of the actuator a spring set is mounted and the compression on both sides of the springs...
    Read More
CONTACT US
Copyright © Tefulong Group Co.,Ltd. All Rights Reserved.